Klik

Klik

Allow Us to Re-Introduce Ourselves

Our cutting-edge dispenser/applicator, engineered with exceptional precision dosing, now works with an even wider variety of viscosities. From CBD to RSO, this updated version is a great way to consume your cannabis oil in multiple formats. From infusing flower, concentrates, or edibles, the options are endless.   

Jupiter_Klik_Dabbing_OnTable
Jupiter_Klik_Bong_TopDown_OnTable
Jupiter_Klik_Bong_CloseUp_OnTable
Jupiter_Klik_CloseUpBong
Jupiter_Klik_Infusing_TopDown_OnBelveeta

Specifications

  • Artboard 4 Reservoir Volumes: 1.0mL & 1.5mL
  • Artboard 4 Precise 25mg/50mg dose per click
  • Artboard 4 Ni-Plated Brass Luer Slip Tip
  • Artboard 4 Open top-fill design
  • Artboard 4 Works with ≤500,000cP
  • Artboard 4 Easy to store and transport
  • Artboard 4 Turn-to-dispense mechanism
  • Artboard 4 Audible and tactile feedback
  • Artboard 4 Dimensions (mm): 98H x 13W
Filling Instructions

Any Oil, Any Way

The versatility of the Klik is entirely up to you. Dab it? Of course. Infuse it with your flower? Definitely. Put it in your tea? You can do that. Straight to the tongue? That’s hardcore, but why not. Medicate anything, within reason of course.

The Klik is what you make of it. 

Precise Dosing

25mg or 50mg Per Click

Klik offers a wide range of possibilities for patients and customers to get creative with their consumption. With its precise dosing system, Klik allows for accurate and consistent measurement, making it easy to infuse cannabis into a variety of products.

FAQ

Frequently Asked Questions

Klik be used with high viscosity oils and CBD for eating, or as a dab applicator.

The syringe body is polypropylene, the plunger is silicone, and the tip is Ni-plated brass.

Klik is compatible with distillate cut with terpenes.

Yes. We do offer prerack and foam automation solutions. Contact us for further details and information.

Contact Our Team

Please fill out the form below to receive pricing and begin an order. We will get back to you as soon as possible.
Please note: We sell our products in wholesale quantities only to verifiable growers, extractors, and retailers.

Klik

Filling & Capping Instructions

Learn how to fill and cap your Klik Dispenser by following the steps below.

Filling the Dispenser

Insert the syringe blunt tip needle into the open end of the Klik dispenser. With the dispenser held upright, fill the dispenser with up to a measured 1.5mL of oil.

Note: The syringe and needle may need to be warmed to improve fluid flow.

Use a short blunt tipped needle (≤14ga.)

Capping the Dispenser Tip

After filling, insert and press-fit the dispensing tip until it is fully seated. Mechanical assistance, such as an arbor press or channel lock pliers, are required to fully seat the mouthpiece.

Do not use a hammer or mallet.

Adjusting the Oil Level

If the dispenser is filled with less than 1.5mL, turn the dial until the top of the liquid is at the Max Fill Line.

Capping the Klik

Install the cap once oil level is at desired height.

When cleaning the outer wall of the dispenser, use <75% isopropyl alcohol to avoid fogging.

Previous slide
Next slide

Filling the Dispenser

Insert the syringe blunt tip needle (14 ga. or smaller) into the open end of the Klik dispenser. With the dispenser held upright, fill the disenser with up to a measured 1.5mL of oil.

Note: The syringe and needle may need to be warmed to improve fluid flow.

Do not fill above the top of the main reservoir.

Capping the Dispenser Tip

After filling, insert and press-fit the dispensing tip until it is fully seated. Mechanical assistance, such as an arbor press or channel lock pliers, are required to fully seat the mouthpiece.

Note: The syringe and needle may need to be warmed to improve fluid flow.

Do not overfill or allow oil to enter the center airway.

Adjusting the Oil Level

If the dispenser is filled with less than 1.5mL, turn the dial until the top of the liquid is at the Max Fill Line.

Capping the Klik

Install the cap once oil level is at desired height.

When cleaning the outer wall of the dispenser, use <75% isopropyl alcohol to avoid fogging.

FAQ

Frequently Asked Questions

Klik be used with high viscosity oils and CBD for eating, or as a dab applicator.

Klik is compatible with distillate cut with terpenes.

The syringe body is polypropylene, the plunger is silicone, and the tip is Ni-plated brass.

Contact Our Team

JUPITER KLIK Patent Pending

ALTERNATIVE DISPENSER

Klik Logo

Experience the difference of a revolutionary applicator. A dual-use dispenser for concentrated doses and oral use. Klik is a secure solution for transporting, storing, and dispensing high viscosity oils.

Klik Dispenser Standing Up
Klik Logo

Experience the difference of a revolutionary applicator. A dual-use dispenser for concentrated doses and oral use. Klik is a secure solution for transporting, storing, and dispensing high viscosity oils.

Klik Dispenser Standing Up
Klik Logo
Klik Dispenser Standing Up

Experience the difference of a revolutionary applicator. A dual-use dispenser for concentrated doses and oral use. Klik is a secure solution for transporting, storing, and dispensing high viscosity oils.

TECHNICAL

SPECIFICATIONS & FEATURES

Peace of mind with every dose. A simple turn-to-dispense method and drawback feature ensure contents dispense on-demand only. Precise drawback feature and removable cap prevents leaking when not in use.

Stock Color

Klik Dispenser Illustration

Specifications

  • Artboard 4 Height: 3.8in (98mm)
  • Artboard 4 Width: 0.6in (13mm)
  • Artboard 4 Ideal for high viscosity oil up to 110,000 centipoise

Dispenser

  • Artboard 4 Easy to Store and Transport
  • Artboard 4 Turn-To-Dispense Mechanism
  • Artboard 4 Audible and Tactile Feedback
  • Artboard 4 Branding, Customization, and Private Labeling Available

Reservoir

  • Artboard 4 Reservoir Volumes: 1.0mL & 1.5mL
  • Artboard 4 Precise 25mg Dose Per Click
  • Artboard 4 Ni-Plated Brass Luer Slip Tip
  • Artboard 4 Open Top-Fill Design

Technical Specifications

Download a detailed list of Klik Technical Specifications by completing the information below.

PRECISION

MANUFACTURING

Top accuracy with audible and tactile feedback. Security and preciseness with a drawback feature. Zero volume plunger empties contents. Developed for high viscosity extracts. No unintended flow. Klik is an alternative to ordinary syringes.
Open Top-Fill Design
Compatible with most filling machines and fillable with a blunt tip syringe.
Klik Dispenser Laying Down
Simple Applicator
User-friendly turn-to-dispense mechanism releases 25mg per click.

PRECISION

MANUFACTURING

Top accuracy with audible and tactile feedback. Security and preciseness with a drawback feature. Zero volume plunger empties contents. Developed for high viscosity extracts. No unintended flow. Klik is an alternative to ordinary syringes.

Open Top-Fill Design
Compatible with most filling machines and fillable with a blunt tip syringe.
Klik Dispenser Laying Down
Simple Applicator
User-friendly turn-to-dispense mechanism releases 25mg per click.

FAQ

Frequently Asked Questions

Klik be used with high viscosity oils and CBD for eating, or as a dab applicator.

Klik is compatible with distillate cut with terpenes.

The syringe body is polypropylene, the plunger is silicone, and the tip is Ni-plated brass.

Contact Our Team

Please fill out the form below to receive pricing and begin an order. We will get back to you as soon as possible.
Please note: We sell our products in wholesale quantities only to verifiable growers, extractors, and retailers.